524512 – net-p2p/bitcoind and net-p2p/bitcoin-qt: do not ...

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

How-to: setup your multisignature Cold wallet in Bitcoin Core 0.20 (highest security setup)

Last release of Core is amazing !
The main new feature is sortedmulti descriptor. This allows you to import your multisig setup in Core almost as if it was Electrum when combine to the new PSBT export in GUI !
As it needs command line and some weird checksum, you also need to input very long command in the console and if you made a mistake, you cannot copy the last command you made. So take your time when the commands are long to check everything and don't miss anything, use copy paste before validating the long command. You only have to do this once fortunately :)
I detail here how you do it with a k of n setup, good luck:
And you are DONE ! You should get the exact same addresses than Electrum and you can created receiving addresses in Qt ! To send money, just go to the send section, use the new coin control feature and export a partially signed transaction. You can use HWI or Electrum to sign it with your hardware wallets !
Notice: You can import more or less than 2000 addresses of each type. If less, blockchain rescan is faster but you may need to redo what we have done here later when all addresses will have been used once. If more, it is the contrary.

You now have the most possibly secure setup in one software: multisig with hardware on the full node wallet. When Bitcoin Core 0.21.0 will be out, we will also have native descriptor wallet so maybe we will have HD version of this. But for now, this is the best you can do ! Enjoy :)

P.S. : if you like doing things in one shot you can do the last two steps in one big command: importmulti '[{"desc": "wsh(sortedmulti(k,[path1]xpub1.../0/*,[path2]xpub2.../0/*,...,[pathn]xpubn/0/*))#check_sum0", "timestamp": birth_timestamp, "range": [0,2000], "watchonly": true, "keypool": true}, {"desc": "wsh(sortedmulti(k,[path1]xpub1.../1/*,[path2]xpub2.../1/*,...,[pathn]xpubn/1/*))#check_sum1", "timestamp": birth_timestamp, "range": [0,2000], "watchonly": true, "internal": true}]'
submitted by Pantamis to Bitcoin [link] [comments]

How To Stake/Mine Coinevo

EVO Staking/Evo mining

Evo uses Proof of Stake consensus mechanism, which is different from Bitcoin's PoW (Proof of Work). Evo mining process in PoS system is called staking. The block producer will get 6.5EVO, as well as the transaction fees and gases as block reward. So the real reward is usually more than 6.5 evo in total.
Basic requirements for staking:
  1. Run a Coinevo fullnode, and keep online (Since Coinevo is using PoS, we don't need any mining machine, just PC or even Raspberry Pi can run a fullnode);
  2. Have some EVO in the wallet (fullnode)(Any amount of EVO can be used for staking, more EVO means higher possibility to stake).
If you have no EVO yet, please get some from market before you doing following staking settings.
Currently, Coinevo Core wallet is the only wallet that support Coinevo PoS staking. Note that other wallets like mobile wallet and Evo Electrum are not able to stake for the time being.
Two ways to stake:
Either way works in the same way for staking, so you can choose either method you like.

Method 1:Staking with evod (command line)

1. Run evod

Follow the guidance to run evod :
./evod -daemon 
Staking is default on for evod, so no need for other options if you only want to stake.

2. Send some EVO to your wallet

First you can generate a new address with:
./evo-cli getnewaddress 
This will generate a new address with Prefix '1'. You can send some EVO to this new generated address for staking. You can generate as many addresses as you like, and send arbitrary EVO as you like for staking.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..
After the EVO node syncing to the latest block, you can check current balance with ./evo-cli getbalance or get utxo list with./evo-cli listunspent
Please do following steps after your coin is mature.

3. Check staking info

Check current staking info with:
./evo-cli getstakinginfo 
You might get the result like this:
{ "enabled": true, "staking": true, "errors": "", "currentblocktx": 0, "pooledtx": 0, "difficulty": 3693409.779133397, "search-interval": 1577, "weight": 309584575558555, "netstakeweight": 1948540143266404, "expectedtime": 805 } 
enabled means if your wallet have enabled staking, it should be true by default. staking means if your wallet is currently staking (mining). weight stands for the amount of EVO that is staking right now, with unit 10^-8EVO, here in the example, we have 0.532EVO staking. expectedtime stands for the expected time that you will get a reward, the unit is second.

4. How to stake if the wallet is encrypted?

If your wallet is not encrypted, you can skip this section. However, for security, we recommand you encrypt your wallet.
Coinevo wallet can be encrypted with encryptwallet . However, staking will be stopped when it is encrypted. For example, ./evo-cli getstakinginfo for a encrypted wallet:
{ "enabled": true, "staking": false, "errors": "", "currentblocksize": 1000, "currentblocktx": 0, "pooledtx": 94, "difficulty": 5788429.670171153, "search-interval": 0, "weight": 53206430, "netstakeweight": 2438496688951881, "expectedtime": 0 } 
See staking turns to false , which means wallet is not staking.
You can use walletpassphrase to unlock wallet for staking:
./evo-cli walletpassphrase "" 99999999 true 
After unlocking, you can double check getstakinginfo , it should look the same with previous unlocked result, staking become true.

Method 2: Staking with evo-qt wallet (official PC wallet)

Current supported platform: Mac/Linux/Windows.

1. Open Evo qt wallet

Launch the wallet.

2. Send some EVO to your wallet

If you already have some EVO in your wallet, you might skip this step.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..

3. Check staking status

The flash sign at the bottom of wallet shows staking info :
Solid black flash means it is staking now. For more information, you can put your mouse on the flash, e.g.:
Hollow flash measn it is not staking
Possible reasons for not staking:
No flash sign means staking is disabled

About block reward

The block producer will get more than 6.5 EVO rewards, something to keep in mind:

How to disable staking?

Staking is by default enabled for Coinevo wallet. If you need to disable staking for some reason (for example exchanges are always recommanded to disable staking), you might following anyone of the 3 ways below:
1 Add -staking=false when running Coinevo node:
./evod -staking=false -daemon 
For qt wallet, it is like:
./evo-qt -staking=false 
2 Add config staking=false in evo.conf;
3 Encrypt wallet, since encrypted wallet will automatically stop staking.
submitted by coinevo to u/coinevo [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

Ravencoin Open Developer Meeting - 1/4/2019

[14:04] Hi everyone! [14:04] :dabbitwave: [14:04] Hey Everybody! [14:04] Hello 😃 [14:04] Sorry we're getting started a bit late. [14:04] Topics: SLC Meetup (March 15th) [14:04] 👋 [14:04] Roadmap breakdown - posted to github [14:05] IPFS (integration) [14:05] greetings 👋 [14:05] So, SLC Meetup on the 15th! [14:05] Great! [14:05] Hi! [14:06] Hi all — a special thanks to the developers and congratulations on an amazing first year!!! # [14:06] <[Dev] Blondfrogs> Hello Everyone! [14:07] We have a tentative agenda with @Tron , @corby speaking. [14:08] We would like to have nice walkthrough of the Raven DevKit for the meetup. [14:08] We are planning on hosting a meetup in SLC at the Overstock building on March 15th from 6:00pm-9:00pm. It is free admission, but there is a page on meetup.com where people can rsvp so that we have a somewhat accurate headcount for food. [14:08] sup guys [14:08] hey russ [14:09] We are planning on having a few speakers and have allotted a bit of time at the end for people to meet and greet each other. [14:09] can you guys link us to the page somewhere when thats available? 😄 [14:10] free food?! [14:10] todays topic? [14:10] yeah can we indicate pepperoni pizza [14:10] Sounds good to me @Jeroz Nothing ordered yet though. 😃 [14:10] only pepperoni pizza is served at true blockchain meetings right [14:10] :blobhide: [14:10] Absolutely. The itinerary just needs to be finalized and then I'll make a broad post about the rest of the details. [14:11] https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ [14:11] 😭 so far away [14:11] West Coast! [14:11] @MTarget But there's pizza, so worth the travel time. [14:11] lol [14:12] I'll be watching the stream if its available since i'm from montreal/canada 😛 [14:12] Ah yes, I love $300 pizza 😉 [14:12] as long as I get to see your smiling faces @Tron @RavencoinDev then it's worth the time [14:12] We'll be there. [14:12] We'll be messaging additional details as they get finalized. [14:12] Greeting and salutations! [14:12] sup [14:13] Hey, $300 is considerably cheaper than 2 $3,700,000 pizzas. [14:14] Ok, switching topics... [14:14] yeah its a way to fly, [14:14] question is whether those piza's will be paid for in RVN coin or not :ThinkBlack: [14:14] Roadmap [14:14] It hasn't changed, just added some detail. [14:14] https://github.com/RavenProject/Ravencoin/tree/masteroadmap [14:15] nice [14:15] This now links to a breakdown for messaging, voting, anti-spam, and rewards (dividends) [14:15] will there be any additional RPC functionality coming in the future, thinking in terms of some functions that are only available in ravencore-lib [14:15] apologies if now is not time to ask questions, i can wait for later [14:15] "Phase 7 - Compatibility Mode" - that's new 😮 [14:15] The protocol for messaging is pretty well established, but the rest isn't in stone (code) yet. [14:16] can you give us details on compatibility mode? [14:16] In broad brush strokes. [14:17] The idea is to allow ravend to act as a daemon that looks like a single coin. [14:17] so ravend that only works with the bitcoin asset? [14:18] interesting [14:19] So you start it with an option to only work with a single asset/token account or something? [14:19] hmm compelling what is the reason for this? some kind of scale or performance? [14:19] ^ [14:19] Example: Configure ravend to listen for transfer RPC call for senttoaddress or sendfrom, but for a specific asset. This would allow easy integration into existing system for assets. [14:20] Only the daemon or the whole wallet UI? [14:20] yeah thats great, rpc functions dont allow us to do this yet, if i recall [14:20] or at least we depend more on ravencore lib [14:20] so like asset zmq [14:20] that's smart [14:20] @Tron it also sounds like it makes our life easier working with RPC, instead of core all the time for some functionality [14:21] if i understand correctly anyways [14:21] So you could run numerous instances of ravend each on their own network and RPC port, each configured for a different asset. You would need some balance of RVN in each one to cover transaction fees, then. [14:21] id be curious to know what all the advantages are of this [14:21] one more question, how would i decentralize the gateway between bitcoin mainnet/ravencoin mainnet? in the current RSK implementation they use a federated gateway, how would we avoid this? [14:21] it sounds neato [14:21] Just the daemon. The alternative is to get exchanges to adapt to our RPC calls for assets. It is easier if it just looks like Bitcoin, Litecoin or RVN to them, but it is really transferring FREE_HUGS [14:22] That makes sense. Should further increased exchange adoption for each asset. [14:22] hmm yeah its just easier for wallet integration because its basically the same as rvn and bitcoin but for a specific asset [14:22] so this is in specific mind of exchange listings for assets i guess [14:23] if i understand rightly [14:23] @traysi Gut feel is to allow ravend to handle a few different assets on different threads. [14:23] Are you going to call it kawmeleon mode? [14:23] Lol [14:23] I read that as kaw-melon mode. [14:24] same lol [14:24] so in one single swoop it possible to create a specific wallet and server daemon for specific assets. great. this makes it easier for exchanges, and has some added advantages with processing data too right? [14:24] Still keeping a RVN balance in the wallet, as well, Tron. How will that work is sendtoaddress sends the token instead of the RVN? A receive-RVN/send tokens-only wallet? [14:25] @traysi Yes [14:25] sendtoaddress on the other port (non RVN port) would send the asset. [14:25] This will be a hugely useful feature. [14:25] ^ [14:26] @Tron currently rpc function not support getaddresses senttowallet and this has to be done in ravencore lib, will this change you propose improve this situation [14:26] Config might look like {"port":2222, "asset":"FREE_HUGS", "rpcuser":"hugger", "rpcpass":"gi3afja33"} [14:26] how will this work cross-chain? [14:28] @push We'd have to go through the rpc calls and work out which ones are supported in compatibility mode. Obviously the mining ones don't apply. And some are generic like getinfo. [14:28] ok cool 👍 cheers [14:29] for now we continue using ravencore lib for our plans to keep track i just wondering if better way [14:29] as we had some issue after realising no rpc function for getting addresses of people who had sent rvn [14:29] @push | ravenland.org all of the node explorer and ravencore-lib functionality is based on RPC (including the addressindex-related calls). Nothing you can't do with RPC, although I'm not sure of the use cases you're referring to.. [14:29] interesting, so ravencore lib is using getrawtransaction somehow [14:29] i thought this may be the case [14:29] that is very useful thankyou for sharing this [14:30] look into addressindex flag and related RPC calls for functions that operate on addresses outside your wallet [14:30] thank you that is very useful, tbh i am not very skilled programmer so just decoding the hex at the raven-cli commandline was a challenge, i shall look more into this, valued information thanks as this was a big ? for us [14:31] Ok, things have gone quiet. New topic. [14:31] IPFS (integration) [14:31] GO [14:33] ... [14:33] <[Dev] Blondfrogs> So, we have been adding ipfs integration into the wallet for messaging. This will allow the wallets to do some pretty sweet stuff. For instance, you will be able to create your ipfs data file for issuing an asset. Push it to ipfs from the wallet, and add the hash right into the issuance data. This is going to allow for a much more seamless flow into the app. [14:34] <[Dev] Blondfrogs> This ofcourse, will also allow for users to create messages, and post them on ipfs and be able to easily and quickly format and send messages out on the network with ipfs data. [14:34] It will also allow optional meta-data with each transaction that goes in IPFS. [14:34] will i be able to view ipfs images natively in the wallet? [14:34] <[Dev] Blondfrogs> Images no [14:34] We discussed the option to disable all IPFS integration also. [14:35] @russ (kb: russkidooski) Probably not. There's some risk to being an image viewer for ANY data. [14:35] No option in wallet to opt into image viewing? [14:35] cool so drag and drop ipfs , if someone wanted to attach an object like an image or a file they could drag drop into ui and it create hash and attach string to transaction command parameters automatically [14:35] We could probably provide a link -- with a warning. [14:35] nomore going to globalupload.io [14:35] :ThinkBlack: [14:35] I understand that the wallet will rely on globalupload.io. (phase 1). Is it not dangerous to rely on an external network? Or am I missing something? [14:36] hmm [14:36] interesting, i suppose you could hash at two different endpoints and compare them [14:36] if you were that worried [14:36] and only submit one to the chain [14:36] You will be able to configure a URL that will be used as an IPFS browser. [14:36] Oh ic [14:36] you wont flood ipfs because only one hash per unique file [14:36] <[Dev] Blondfrogs> There are multiple options for ipfs integration. We are building it so you can run your own ipfs node locally. [14:36] <[Dev] Blondfrogs> or, point it to whatever service you would like. e.g. cloudflare [14:36] this is very cool developments, great to see this [14:37] Just like the external block explorer link currently in preferences. [14:37] @[Dev] Blondfrogs what about a native ipfs swarm for ravencoin only? [14:37] We have discussed that as an option. [14:37] @push | ravenland.org Considering having a fallback of upload through globalupload.io and download through cloudflare. [14:37] <[Dev] Blondfrogs> @russ (kb: russkidooski) We talked about that, but no decisions have been made yet. [14:37] yeah, i would just use two endpoints and strcompare the hash [14:37] as long as they agree good [14:37] submit tran [14:38] else 'potentially mysterious activity' [14:38] ? [14:38] if you submitted the file to ipfs api endpoints [14:38] Will the metadata just be a form with text only fields? [14:39] and then you would get 2 hashes, from 2 independent services [14:39] that way you would not be relying on a central hash service [14:39] and have some means of checking if a returned hash value was intercepted or transformed [14:39] i was answering jeroz' question [14:40] about relying on a single api endpoint for upload ipfs object [14:40] We have also kicked around the idea of hosting our own JSON only IPFS upload/browse service. [14:41] I have a service like this that is simple using php [14:41] we only use it for images right now [14:41] but fairly easy to do [14:41] Yup [14:42] Further questions about IPFS? [14:43] contract handling? file attach handling? or just text fields to generate json? [14:44] trying to get an idea of what the wallet will offer for attaching data [14:44] Probably just text fields that meet the meta-data spec. [14:44] ok noted [14:44] What do you mean by contract handling @sull [14:45] We won't prevent other hashes from being added. [14:45] asset contract (pdf etc) hash etc [14:45] <[Dev] Blondfrogs> also, being able to load from a file [14:45] got it, thanks [14:47] Let's do some general Q&A [14:48] Maybe just a heads up or something to look for in the future but as of right now, it takes roughly 12 hours to sync up the Qt-wallet from scratch. Did a clean installation on my linux PC last night. [14:48] Any plans or discussions related to lack of privacy of asset transfers and the ability to front run when sending to an exchange? [14:48] ^ [14:48] Is there a way to apply to help moderate for example the Telegram / Discord, i spend alot of time on both places, sometimes i pm mods if needed. [14:49] Any developed plans for Asset TX fee adjustment? [14:49] also this^ [14:49] @mxL86 We just created a card on the public board to look into that. [14:49] General remark: https://raven.wiki/wiki/Development#Phase_7_-_Compatible_Mode = updated reflecting Tron's explanation. [14:49] @mxL86 That's a great question. We need to do some profiling and speed it up. I do know that the fix we added from Bitcoin (that saved our bacon) slowed things down. [14:50] Adding to @mxL86 the sync times substantially increased coinciding with the asset layer activation. Please run some internal benchmarks and see where the daemon is wasting all its cycles on each block. We should be able to handle dozens per second but it takes a couple seconds per block. [14:50] @BW__ no plans currently for zk proofs or anything if that's what you're asking [14:50] You are doing a great job. Is there a plan that all this things (IPFS) could be some day implemented in mobile wallet? Or just in QT? [14:50] i notice also that asset transactions had some effect on sync time as we were making a few. Some spikes i not analysed the io and cpu activity properly but will if there is interest [14:51] we are testing some stuff so run into things i am happy to share [14:51] @BW__ Might look at Grin and Beam to see if we can integrate Mimble Wimble -- down the road. [14:51] yeees [14:51] @J. | ravenland.org work with the telegram mods. Not something the developers handle. [14:51] i love you [14:51] @J. | ravenland.org That would be best brought up with the operators/mods of teh telegram channel. [14:51] @corby @Tron thnx [14:51] @S1LVA | GetRavencoin.org we're planning on bumping fees to... something higher! [14:51] no catastrophic failures, just some transaction too smals, and mempool issues so far, still learning [14:52] @corby i thought that this may happen :ThinkBlack: [14:52] @corby x10? 100x? 1000x? Ballpark? [14:52] Definitely ballpark. [14:52] 😃 [14:52] 😂 [14:52] Is a ballpark like a googolplex? [14:53] @push | ravenland.org asset transactions are definitely more expensive to sync [14:53] yes yes they are [14:53] they are also more expensive to make i believe [14:53] 10,000x! [14:53] as some sync process seems to occur before they are done [14:53] @traysi ★★★★★ thanks for the suggestions we are going to be looking at optimizations [14:53] But, it is way slower than we like. Going to look into it. [14:53] i do not understand fully its operation [14:53] 1000x at minimum in my opinion [14:53] its too easy to spam the network [14:54] yes there has been some reports of ahem spam lately [14:54] :blobhide: [14:54] 😉 [14:54] cough cough ravenland [14:54] @russ (kb: russkidooski) we're in agreement -- it's too low [14:54] default fee 0.001 [14:54] ^ something around here [14:54] @corby yep we all are i think [14:55] waaay too low [14:55] meaningful transactions start with meaningful capital expense [14:55] though there is another scenario , there are some larger volume, more objective rich use cases of the chain that would suffer considerably from that [14:55] just worth mentioning, as i have beeen thinking about this a lot [14:55] there are some way around, like i could add 1000 ipfs hashes to a single unique entity, i tested this and it does work [14:56] @russ (kb: russkidooski) What would you suggest. [14:57] I had a PR for fee increase and push back. [14:57] Ignore the push back. 0.001 RVN is not even a micro-farthing in fiat terms [14:57] definitely around 1000x [14:57] Vocal minority for sure [14:57] ^ yep [14:57] @russ (kb: russkidooski) That sounds reasonable. [14:57] Couple hundred Fentons [14:58] right now an asset transaction is 0.01 of a penny essentially [14:58] 1 RVN would work now, but not when RVN is over $1. [14:58] yes exactly [14:58] Hi. Late to the party. [14:58] We are also talking about a min fee. The system will auto-adapt if blocks fill up. [14:58] im thinking tron, some heavy transaction use cases would fall out of utility use if that happened [14:58] so whats the thinking there [14:59] is there a way around the problem, bulked ipfs hash transactions? [14:59] 1000x would put us around btc levels [14:59] maybe a minimum 500x? [14:59] @russ (kb: russkidooski) Agreed. [14:59] <[Dev] Blondfrogs> It is time to wrap it up here. Everyone. Thank you all for your questions and thoughts. We will be back in 2 weeks. 😃 [14:59] Small increase and review. [14:59] Thanks all! [14:59] Cheers. [15:00] yeah sorry for 1 million questions guys hope i didnt take up too much time [15:00] cheers all 👍 [15:00] Thanks everyone [15:00] Thanks everyone for participating!!! [15:00] That is what we are here for [15:00] 100x-500x increase, 1000x maximum [15:00] 🍺

submitted by Chatturga to Ravencoin [link] [comments]

Groestlcoin June Development Update & Release!

Another Quarter, Another Release! The Groestlcoin production factory has been working overtime as always in order to deliver even more tech to push Groestlcoin mainstream when the time comes.
There have been many new fantastic wallets and exchanges added to Groestlcoins repertoire over the past 3 months so we will re-cap these before moving on to what is new today.

Recap

What's New

Re-forged: Groestlcoin Samourai

Groestlcoin Samourai is a wallet for the streets. A modern Groestlcoin wallet hand-forged to keep your transactions private, your identity masked, and your funds secure. Its main advantages are its extreme portability and is the most secure Groestlcoin mobile HD wallet.
We've built a wallet that Groestlcoin deserves. If you are looking for a wallet that Silicon Valley will never build, the regulators will never allow, and the VC's will never invest in, this is the perfect wallet for you.
![Groestlcoin Samourai Release Video](http://img.youtube.com/vi/i3WU8Tde8XQ/0.jpg)

Head over to the Groestlcoin Samourai Release Page here for the full release announcement.

New: GroestlImage

Groestlimage turns any file into a mnemonic phrase allowing users to generate Groestlcoin private keys and addresses based on the data URI of the provided file. A picture is worth a thousand Groestls.

Features:

Link

https://groestlcoin.org/groestlimage/

Source Code

https://github.com/Groestlcoin/groestlimage

New: Groestlcoin Core Config Generator

Groestlcoin Core Config Generator is a simple GUI to configure the groestlcoin.conf file – A developers dream tool!
Each configuration option is available via the user interface, grouped by what attributes they affect. For ease of getting started with a new configuration, a variety of preset "node classes" are available on the right-hand-side of the screen. Selecting a preset will load our recommended base configuration for a node fitting that description, at which point you can then tune the configuration at the single option level.

Features

Link

https://config.groestlcoin.org/

Source Code

https://github.com/Groestlcoin/groestlcoin-core-config-generator

New: Groestlcoin Dumb Block Explorer

Dumb Block Explorer is a trivial block explorer written in a single PHP file. Now everybody can run their own block explorer.

Features

Link

https://www.groestlcoin.org/explore

Source Code

https://github.com/Groestlcoin/dumb-block-explorer

New: Groestlcoin SMS Push TX

Groestlcoin Simple Push TX is a server to push Groestlcoin transactions via SMS. Now everybody can send new transactions via SMS if the Internet is not usable (i.e. blocked by government entities or becomes otherwise unavailable).

Features

Source Code

https://github.com/Groestlcoin/smspushtx

Update: Electrum-GRS 3.3.6

Electrum-GRS is Groestlcoins #1 thin-client for Windows, MacOS, Linux and Android, based on a client-server protocol. Supporting multi-sig wallets without the bloat of downloading the entire blockchain.

New Features (Universal)

New Features (Windows, MacOS, Linux)

New Features (Android)

Link

https://github.com/Groestlcoin/electrum-grs/releases/download
https://play.google.com/store/apps/details?id=org.groestlcoin.electrumgrs

Source Code

https://github.com/Groestlcoin/electrum-grs
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

Unconfirmed Bitcoin Transaction

Hey everyone, I'm new to reddit so I'm not sure if this is the correct place to ask my question...but it is related to an unconfirmed Bitcoin transaction.
Details- On December 29th, ~11 PM (Eastern Standard Time), I sent ~.5 bitcoins FROM my desktop wallet (Bitcoin Knots) TO my account on Binance (exchange).
When I view my TRANSACTIONS page in my Bitcoin Knots wallet, I see the following information -
Status: 0/unconfirmed, in memory pool Date: 12/29/2017 23:07 To: Binance 19x7XhTaLRWuBZsLfkHRP8yhQPk7q8MAqu Debit: -0.50129628 BTC Transaction fee: -0.00049177 BTC Net amount: -0.50178805 BTC Transaction ID: bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3 Transaction total size: 782 bytes Output index: 0
Here is the BlockChain information related to this transaction - https://blockchain.info/tx/bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3
And here is the Block Explorer information related to this transaction - https://blockexplorer.com/tx/bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3
As you can see, the RECEIVED TIME is different across all three (the wallet, the first website, and the second website).
Could anyone explain what might be going on and how to fix this?
Just an FYI...I already performed the -rescan option on my "bitcoin-qt.exe" file. It did some "update database file" or something like that (which was about 2 hours ago) but still no confirmed transaction.
Oh yeah, one more thing, on my TRANSACTIONS page in Bitcoin Knots, the "Cancel Transaction" and "Increase Transaction Fee" is disabled/greyed out when I 'right-click' the transaction record - so, I'm not sure what that indicates either.
Any help is much appreciated!
Thanks!
submitted by Butt0nSmash3r to Bitcoin [link] [comments]

A Plugin Framework for Litecoin Qt

Introduction

Litecoin provides an infrastructure for efficient payments and immutable data storage. While the infrastructure itself is revolutionary, we are still far from unleashing its full potential. Many more applications can be built around Litecoin. In order to facilitate easier application development and adoption, I propose a plugin framework based on the existing Litecoin Qt program.
Litecoin Qt is an "official" full Litecoin node with an easy to use graphical user interface (GUI) that can be used by those who are not technically savvy. It mainly functions as a Litecoin wallet to send and receive Litecoins.
As a wallet, Litecoin Qt does not really provide much advantage compared with lightweight wallets like Electrum-LTC. However, Litecoin Qt is the only available Litecoin full node with a nice GUI, and these properties make Litecoin Qt the ideal platform for supporting a plugin framework to host applications because many applications will need Litecoin blockchain data and an easy to use graphical interface to be suitable for normal users.
I list a few interesting example applications here and hope these will stimulate more ideas.

Example Applications

USDT

USDT is a token on top of Bitcoin blockchain and backed by USD. It is used by some major exchanges like Poloniex and Bitfinex. Technically, all data related to the token is stored on Bitcoin blockchain using OP_RETURN transactions. However, it is obvious that Litecoin is much more suitable for this job because of its much lower transaction fee and faster confirmation.
While USDT makes USD much more usable on the Internet, it does not really have an easy to use wallet. I think a plugin for Litecoin Qt that scans OP_RETURN data and finds USDT related transactions and makes OP_RETURN transactions to send USDT can become an easy to use wallet.
Many similar plugins depending on OP_RETURN transactions can be built. For example, a plugin can be used to send holiday (e.g. Valentine's day) wishes to the Litecoin blockchain, which thus lasts as long as Litecoin itself.

Efficient and decentralized CoinJoin

CoinJoin is an effective way for providing fungibility and anonymity to Litecoin users. CoinJoin services for Bitcoin are already available through centralized websites like https://bitmixer.io/ or decentralized standalone programs like https://github.com/JoinMarket-Org/joinmarket. While a decentralized program provides better anonymity and security, it incurs a cumbersome downloading and installation process, limiting its usage.
Compared with a standalone program, a CoinJoin plugin on Litecoin Qt is more available and much easier to install and use. Litecoins can be easily transferred from the Litecoin Qt wallet to the CoinJoin network for mixing and back to other addresses in the wallet with just one click.
Another advantage of making such a CoinJoin function a plugin instead of part of Litecoin Qt itself is that a plugin avoids potential legal issues. Some governments could potentially ban coins that provide complete anonymity within their protocol. Such a plugin avoids this issue and provides good anonymity and also keeps the Litecoin protocol simple.

Easier service consumption

Service providers like music streaming companies can provide plugins for users to easily pay for their services. Registration is not needed, and authentication can be done by automatically signing a token provided by the service provider using an address' private key in the wallet. Payments can be finished by simply clicking one button, and then Litecoins will be transferred to the service provider.

Implementation

Implementation of such a plugin framework requires a capable and secure plugin language. A good candidate is Lua. Lua is a widely used plugin language because of its easiness to embed, fast execution, and short learning curve.
Communication between the plugins and Litecoin Qt can be done through either Litecoin Qt's standard RPCs or C++ APIs specifically exposed by the plugin framework.
In order to forbidden plugins stealing wallets, plugins need to be sandboxed so that visiting local file systems (excluding locations for temporary files) should be disabled. While this is difficult for many script languages including Python, Lua can achieve it relatively easily. Beside that, only open source plugins shall be trusted until we have enough confidence on the framework's security.
This gives an example application with Lua plugins: https://john.nachtimwald.com/2014/08/16/extending-an-application-with-lua-plugins/. A Lua plugin for Litecoin Qt should be similar.
submitted by xinxi to litecoin [link] [comments]

Bitcoin.pl Poradnik #1 : Instalacja klienta Bitcoin-Qt How To Generate Bitcoin SegWit Address With Bitcoin Core Full Node Bitcoin Q&A: Orphaned blocks and stuck transactions Bitcoin Q&A: Anonymity and confidential transactions Programming Bitcoin-qt using the RPC api (1 of 6)

… unexpected fee 0480293 [Qt][CoinControl] fix UI bug that could result in paying unexpected fee (Jonas Schnelli) luke-jr added a commit to luke-jr/bitcoin that referenced this pull request Sep 21, 2016 @@ -170,11 +170,19 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" " rebuild the block database if you are sure that your computer's date and " " time are correct "), QT_TRANSLATE_NOOP (" bitcoin-core ", " " " The fee rate (in %s/kB) used to discard change (to fee) if it would be dust " " at this fee rate (default: %s) Note: We will always discard up to the dust " " relay fee and a discard fee above ... The fee required for a transaction to quickly confirm varies according to network conditions. Generally it floats around slowly, but sometimes it shoots up due to spam transactions or a series of randomly-slow blocks. In such cases, you may find that your incoming or outgoing transactions get stuck in an unconfirmed state for a long time. The Bitcoin blockchain data contains all transaction history from the day Bitcoin was created to till date. With 1MB block size and 10 minutes block time the size of the chain grows larger and larger. Hence the storage capacity needed to run a full node will only keeps increasing in the future. To overcome this issue Bitcoin core team have released a feature in version 0.11.0 called block file ... The official bitcoind and bitcoin-qt in Gentoo enables patches which breaks Bitcoin by default. Please disable the ljr patches by default or preferably all together. Enabling the stupidmoralnazi aka ljr use flag results in errors like these: 2014-10-05 11:38:09 ERROR: AcceptToMemoryPool : ignoring transaction ...

[index] [48127] [50421] [27256] [49039] [20201] [33011] [2804] [41460] [10103] [38382]

Bitcoin.pl Poradnik #1 : Instalacja klienta Bitcoin-Qt

Bitcoin.pl Poradnik #1 : Instalacja klienta Bitcoin-Qt ----- Nasz poradnik w prosty i zrozumiały sposób przedstawi Ci wszystkie kroki potrzebne do zainstalowania klienta transakcji Bitcoin-Qt ... Because of Bitcoin BlockChain’s large size the free space of the hard disk in the virtual machine must be at least 350 GB or more. Since your transactions will be stored on the disk as well, we ... Learning Bitcoin 4 - Bitcoin Command Line Helper - Part 1. bitcoin p=np forum.bitcoin. pl bitcoin qt bitcoin qr code bitcoin qt synchronizing with network bitcoin qt wallet location bitcoin qt import wallet bitcoin qt synchronizing with network slow ... 1 month free. Find out why Close ... How To Build Raw Bitcoin Transactions in NodeJS - Duration: 16:57. m1xolyd1an 5,087 views. 16:57. Bitcoin-QT wallet review - Duration: 8:53. Secure Your Wallet ...

#