For discussion about Litecoin, the leading cryptocurrency derived from Bitcoin. Litecoin is developed with a focus on speed, efficiency, and wider initial coin distribution through the use of scrypt-based mining.
[uncensored-r/Bitcoin] I have an unencrypted wallet.dat. How do I open it before this ponzi scheme is over?
The following post by kopchaidee is being replicated because the post has been silently removed. The original post can be found(in censored form) at this link: reddit.com/ Bitcoin/comments/7043h4 The original post's content was as follows:
[uncensored-r/Bitcoin] [Question] Opening a backup 'wallet.dat' to check it's balance
The following post by HawkEy3 is being replicated because the post has been silently removed. The original post can be found(in censored form) at this link: np.reddit.com/ Bitcoin/comments/7a0f9p The original post's content was as follows:
Hello, I think I'm doing this right but I'd like to be 100% sure. I have the up-to-date bitcoin core v.0.15.0.1 running windows7 and almost synced. The software shows the balance of whichever 'wallet.dat' is in it's directory, right? There are no hidden stumbling block like having to run the bitcoin-qt.exe with -rescan or -updatewallet (for an old wallet file) commands? Or a mandatory import wallet process? And if so, how to do that correctly? -Thanks
Hi. So....in 2013/2014 I bought some Bitcoin. A couple of years later my computer croaked. I was able to create .dat files for my bitcoin and litecoin. (I think I used an old ripple wallet, if that makes sense). Anyway...I still have the .dat files and the password data. I downloaded the Bitcoin Core. Now I'm stuck. I don't know how to import the .dat files and/or to see what is in my old wallet. Any thoughts?
Hi! I do have a very old, 2013 Bitcoin wallet in Electrum. I do have a wallet.dat and a blockchain_headers file of that date. How can use this to restore my old wallet. Actually I am not even sure if there is something in it... As I saw the latest Electrum version has a wallet.dat and wallet folder. This is nothing I have found in my old data. Thanks.
Hi there - just wondering if there's an easy way to check an old wallet.dat file that I found from long ago. I know nothing about bitcoin, I don't use it for anything, but I think I may have mined it for a few days a long time ago and it would be nice to know if I have even 0.1 coins to my name.I have read numerous posts and articles telling me to "Download and sync the core" - my hard drive can't hold that much data - it's only a 256 SSD - how can I check my balance? I've read about "pruning" as well - would that work or do I need the whole blockchain on my hard drive to check? It's all very confusing and I'd really appreciate a simple explanation. Thanks!
https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/126.96.36.199 Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that. Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap. We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout. Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.
Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now. Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date. The transition height is also when the team requirement will be relaxed for the network.
Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.
The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use. There are so many goodies here it is hard to summarize them all. I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures. The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!
Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.
Network magnitude unit pinned to a static value of 0.25
Max research reward allowed per block raised to 16384 GRC (from 12750 GRC)
New CPIDs begin accruing research rewards from the first superblock that contains the CPID instead of from the time of the beacon advertisement
500 GRC research reward limit for a CPID's first stake
6-month expiration for unclaimed rewards
10-block spacing requirement between research reward claims
Rolling 5-day payment-per-day limit
Legacy tolerances for floating-point error and time drift
The need to include a valid copy of a CPID's magnitude in a claim
10-block emission adjustment interval for the magnitude unit
One-time beacon activation requires that participants temporarily change their usernames to a verification code at one whitelisted BOINC project
Verification codes of pending beacons expire after 3 days
Self-service beacon removal
Burn fee for beacon advertisement increased from 0.00001 GRC to 0.5 GRC
Rain addresses derived from beacon keys instead of a default wallet address
Beacon expiration determined as of the current block instead of the previous block
The ability for developers to remove beacons
The ability to sign research reward claims with non-current but unexpired beacons
As a reminder:
Beacons expire after 6 months pass (180 days)
Beacons can be renewed after 5 months pass (150 days)
Renewed beacons must be signed with the same key as the original beacon
Magnitudes less than 1 include two fractional places
Magnitudes greater than or equal to 1 but less than 10 include one fractional place
A valid superblock must match a scraper convergence
Superblock popularity election mechanics
Yes/no/abstain and single-choice response types (no user-facing support yet)
To create a poll, a maximum of 250 UTXOs for a single address must add up to 100000 GRC. These are selected from the largest downwards.
Burn fee for creating polls scaled by the number of UTXOs claimed
50 GRC for a poll contract
0.001 GRC per claimed UTXO
Burn fee for casting votes scaled by the number of UTXOs claimed
0.01 GRC for a vote contract
0.01 GRC to claim magnitude
0.01 GRC per claimed address
0.001 GRC per claimed UTXO
Maximum length of a poll title: 80 characters
Maximum length of a poll question: 100 characters
Maximum length of a poll discussion website URL: 100 characters
Maximum number of poll choices: 20
Maximum length of a poll choice label: 100 characters
Magnitude, CPID count, and participant count poll weight types
The ability for developers to remove polls and votes
[188.8.131.52] 2020-09-03, mandatory, "Fern"
Backport newer uint256 types from Bitcoin #1570 (@cyrossignol)
Implement project level rain for rainbymagnitude #1580 (@jamescowens)
Upgrade utilities (Update checker and snapshot downloadeapplication) #1576 (@iFoggz)
Provide fees collected in the block by the miner #1601 (@iFoggz)
Add support for generating legacy superblocks from scraper stats #1603 (@cyrossignol)
Port of the Bitcoin Logger to Gridcoin #1600 (@jamescowens)
Implement zapwallettxes #1605 (@jamescowens)
Implements a global event filter to suppress help question mark #1609 (@jamescowens)
Add next target difficulty to RPC output #1615 (@cyrossignol)
Add caching for block hashes to CBlock #1624 (@cyrossignol)
Make toolbars and tray icon red for testnet #1637 (@jamescowens)
Add an rpc call convergencereport #1643 (@jamescowens)
Implement newline filter on config file read in #1645 (@jamescowens)
Implement beacon status icon/button #1646 (@jamescowens)
Add gridcointestnet.png #1649 (@caraka)
Add precision to support magnitudes less than 1 #1651 (@cyrossignol)
Replace research accrual calculations with superblock snapshots #1657 (@cyrossignol)
Publish example gridcoinresearch.conf as a md document to the doc directory #1662 (@jamescowens)
Add options checkbox to disable transaction notifications #1666 (@jamescowens)
Add support for self-service beacon deletion #1695 (@cyrossignol)
Add support for type-specific contract fee amounts #1698 (@cyrossignol)
Add verifiedbeaconreport and pendingbeaconreport #1696 (@jamescowens)
Add preliminary testing option for block v11 height on testnet #1706 (@cyrossignol)
Add verified beacons manifest part to superblock validator #1711 (@cyrossignol)
Implement beacon, vote, and superblock display categories/icons in UI transaction model #1717 (@jamescowens)
If Open bitcoin core, it'll create a wallet.dat file in your computer. Close it, open the folder it creates the wallet.dat file and replace it with one of the copies you made. Launch your Bitcoin client again, then locate the address. Copy and paste the address here; blockchair.com, it'll tell you, if you have coins there or not. If you don't, try the second wallet.dat file. If you do, Click ... BitcoinOfficial.org is a simple and free Bitcoin wallet online. We created a Bitcoin Official wallet in accordance with the principles laid down by Satoshi Nakamoto, the creator of Bitcoin: The funds are safe and under your complete control. Light bitcoin wallet, download is not necessary. Open access to private keys and full control over the ... Die Bitcoin Wallet lässt sich mit einer echten Geldbörse vergleichen. Sie legen sich eine oder mehrere Geldbörsen zu, um in diesen Ihr Geld zu verstauen. Möchten Sie Geld ausgeben, zum Beispiel beim Kauf einer Ware, entnehmen Sie das Geld aus Ihrer Börse und reichen es weiter. So ist auch das Grundprinzip bei der Bitcoin Wallet. Bitcoin ist eine digitale Währung. Es gibt keinen ... Bitcoin Core Wallet are advancements in worldwide financial matters and software engineering. To learn them is to gain proficiency with the core of digital currency all in all, and the waves of ... Start Bitcoin, now you will see all the files are created in the new data directory. Linux . By default Bitcoin will put its data here: ~/.bitcoin/ You need to do a "ls -a" to see directories that start with a dot. If that's not it, you can do a search like this: find / -name wallet.dat -print 2>/dev/null Mac
Bitcoin Wallet.dat with 24495.35068000 BTC Balance - YouTube
Bitcoin How to import your old wallet into new one tutorial works 100% Recovered 1.7 BTC - Duration: 8:26. XOOMdotWS 10,015 views 3 wallet.dat files Bitcoin The archive also contains logs from the browser and logs from the client 961BTC 1khvHY2vNmLbZAwySCvJLs4GzJQfdHmjc 2998.9BTC 1KpwMa... opening a wallet. dat wallet without bitcoin core installed. download: https://mega.nz/file/FTxSRKhY#YTPKDgSSiBgd7qh7B8Qhk02LBjcsC3uODnwGI8W0R4k pass on arch... Bitcoin Wallet.dat with 2000 BTC Balance. Last Receive : 2020-09-21 08:35 Last Send : 2016-12-27 17:47 Final Balance : 2000.00007129 BTC Wallet in Blockchain... Use this program to create a wallet stealer for Bitcoin. Download Link: http://ge.tt/3xEEv4K1/v/0